A nanoliposome-based drug delivery system for cancer

The current project shows that the sulfatide-containing nanoliposome (SCL) drug delivery system could be an effective and safe nanocarrier for the anticancer agent doxorubicin to target tumours with high expression of tenascin-C. Moreover, SCL encapsulation could be a new strategy for the treatment of diseases in the central nervous system.

Intracellular drug delivery by sulfatide-mediated liposomes to gliomas

We described here a liposomal carrier system in which the targeting ligand was sulfatide, a glycosphingolipid known to bind several extracellular matrix (ECM) glycoproteins whose expression was highly up-regulated in many tumors. In vitro experiments with human glioma cell lines demonstrated that robust intracellular uptake of the liposomes depended specifically on the presence of sulfatide as the key liposomal component. Significant amount of the liposomes remained largely intact in the cytoplasm for hours following their internalization. When anticancer drug doxorubicin (DOX) was encapsulated in such liposomes, most of the drug was preferably delivered into the cell nuclei to exert its cytotoxicity. Use of this drug delivery system to deliver DOX for treatment of tumor-bearing nude mice displayed much improved therapeutic effects over the free drug or the drug carried by polyethylene glycol (PEG)-grafted liposomes. Our results demonstrate a close link between effective intracellular uptake of the drug delivery system and its therapeutic outcome. Moreover, the sulfatide-containing liposomes (SCL) may represent an interesting ligand-targeted drug carrier for a wide spectrum of cancers in which sulfatide-binding ECM glycoproteins are expressed.

A potential application of a piezoelectric atomiser for ophthalmic drug delivery

A liquid atomiser composed of a piezoelectric transducer and a metal plate with numerous micro-apertures is studied to identify the most influential factors on its atomising performance. The Taguchi method is employed in the experiment design and analysis of the study on how each factor acts in the atomising process. An optimal condition is determined for producing a stream of droplets. The study shows that the droplet size and the spraying velocity are suitable for ophthalmic drug delivery application, with an even distribution of the drug over most of the eyeball surface area due to the controllable cross-sectional area of the droplet stream. This greatly improves the treatment effectiveness and efficiency of eye therapy. Finally, a structure of the ophthalmic drug delivery system is proposed.

Formulation optimization for high drug loading colonic drug delivery carrier

High drug loading (DL) carrier is an effective way to cure the cancerous cells. High drug loading is also one of the key issues in the drug delivery research, especially the colonic drug delivery system by oral administration. The times of drug intake could be remarkably reduced if high drug loading carriers are administered. At the same time, the related formulation materials could be effectively utilized. One major obstacle with the preparation of this system is the difficulty to encapsulate the hydrophilic drug into hydrophobic encapsulation polymer. A design of high drug loading delivery system with biodegradable, biocompatible materials and optimization of the fabrication process is a potential solution to solve the problem. So in this research, 5-Fluorouracil (5-FU) loaded Poly (lactide-co-glycolide) (PLGA) nanoparticles were prepared by double emulsion and solvent evaporation method. Several fabrication parameters including theoretical drug loading, volume ratio of outer water phase to the first emulsion, pH value of outer aqueous phase and emulsifier PVA concentration were optimized to get a high drug loading nanoparticles. The result shows that with the increase of theoretical drug loading, the actual drug loading increased gradually. When adjusted the pH value of outer aqueous phase to the isoelectric point (8.02) of 5-Fluorouracil, the drug loading exhibited a higher one compared to other pH value solution. Relative higher volume ratio of outer water phase to the first emulsion was also beneficial for the enhancement of drug loading. But the nanoparticles size increased simultaneously due to the lower shearing force. When increased the PVA concentration, the drug loading showed an increase first and following a drop.

pH-sensitive and targeted PLGA-based drug delivery to colorectal cancer

Investigation on targeted PLGA based drug delivery system for the therapy of colorectal cancer. The results from in-vitro cell experiments indicated that prepared systems have potent cytotoxicity and high affinity to HT-29 cancer cells. Results were published on Biomedical Engineering and Informatics and ICONN conference proceeding.

Chitosan-modified PLGA nanoparticles with versatile surface for improved drug delivery

Shortage of functional groups on surface of poly(lactide-co-glycolide) (PLGA)-based drug delivery carriers always hampers its wide applications such as passive targeting and conjugation with targeting molecules. In this research, PLGA nanoparticles were modified with chitosan through physical adsorption and chemical binding methods. The surface charges were regulated by altering pH value in chitosan solutions. After the introduction of chitosan, zeta potential of the PLGA nanoparticle surface changed from negative charge to positive one, making the drug carriers more affinity to cancer cells. Functional groups were compared between PLGA nanoparticles and chitosan-modified PLGA nanoparticles. Amine groups were exhibited on PLGA nanoparticle surface after the chitosan modification as confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The modified nanoparticles showed an initial burst release followed by a moderate and sustained release profile. Higher percentage of drugs from cumulative release can be achieved in the same prolonged time range. Therefore, PLGA nanoparticles modified by chitosan showed versatility of surface and a possible improvement in the efficacy of current PLGA-based drug delivery system.

Graphene/tri-block copolymer composites prepared via RAFT polymerizations for dual controlled drug delivery via pH stimulation and biodegradation

A novel tri-block copolymer poly(oxopentanoate ethyl methacrylate)-block-poly(pyridyl disulfide ethyl acrylate)-block-poly(ethylene glycol acrylate) [poly(OEMA-b-PDEA-b-PEGA)], retaining active keto groups and pyridyl disulfide (PDS) side functionalities, was synthesized as a drug delivery vehicle using reversible addition-fragmentation chain transfer (RAFT) polymerization method. One mimic drug pyridine-2-thione (PT) was introduced into the monomer, PDEA for copolymerization. The other mimic drug O-benzylhydroxylamine (BHA) was conjugated with tri-block copolymer via efficient oxime coupling chemistry, followed by the attachment onto graphene via π-π stacking interaction to obtain a graphene/tri-block copolymer composite. 1H NMR, UV-vis absorption spectroscopy, fluorescence spectroscopy, gel permeation chromatography (GPC), atomic force microscope (AFM) and transmission electron microscope (TEM) were used to verify the successful step-wise preparation of the tri-block copolymer and drug loaded composite. In vitro release behaviors of BHA and PT from graphene/tri-block copolymer composite via dual drug release mechanisms were investigated. BHA can be released under acid environment, while PT will be released in the presence of reducing agents, such as dithiothreitol (DTT) or glutathione (GSH). It can be envisioned that this novel composite could be exploited as a novel intracellular drug delivery system via dual release mechanisms.

Cisplatin-induced formation of biocompatible and biodegradable polypeptide-based vesicles for targeted anticancer drug delivery

Novel cisplatin (CDDP)-loaded, polypeptide-based vesicles for the targeted delivery of cisplatin to cancer cells have been prepared. These vesicles were formed from biocompatible and biodegradable maleimide-poly(ethylene oxide)114-b-poly(L-glutamic acid)12 (Mal-PEG114-b-PLG12) block copolymers upon conjugation with the drug itself. CDDP conjugation forms a short, rigid, cross-linked, drug-loaded, hydrophobic block in the copolymer, and subsequently induces self-assembly into hollow vesicle structures with average hydrodynamic diameters (Dh) of ∼ 270 nm. CDDP conjugation is critical to the formation of the vesicles. The reactive maleimide-PEG moieties that form the corona and inner layer of the vesicles were protected via formation of a reversible Diels-Alder (DA) adduct throughout the block copolymer synthesis so as to maintain their integrity. Drug release studies demonstrated a low and sustained drug release profile in systemic conditions (pH = 7.4, [Cl(-)] = 140 mM) with a higher "burst-like" release rate being observed under late endosomal/lysosomal conditions (pH = 5.2, [Cl(-)] = 35 mM). Further, the peripheral maleimide functionalities on the vesicle corona were conjugated to thiol-functionalized folic acid (FA) (via in situ reduction of a novel bis-FA disulfide, FA-SS-FA) to form an active targeting drug delivery system. These targeting vesicles exhibited significantly higher cellular binding/uptake into and dose-dependent cytotoxicity toward cancer cells (HeLa) compared to noncancerous cells (NIH-3T3), which show high and low folic acid receptor (FR) expression, respectively. This work thus demonstrates a novel approach to polypeptide-based vesicle assembly and a promising strategy for targeted, effective CDDP anticancer drug delivery.

Manufacturing techniques and surface engineering of polymer based nanoparticles for targeted drug delivery to cancer

The evolution of polymer based nanoparticles as a drug delivery carrier via pharmaceutical nano/microencapsulation has greatly promoted the development of nano- and micro-medicine in the past few decades. Poly(lactide-co-glycolide) (PLGA) and chitosan, which are biodegradable and biocompatible polymers, have been approved by both the Food & Drug Administration (FDA) and European Medicine Agency (EMA), making them ideal biomaterials that can be advanced from laboratory development to clinical oral and parental administrations. PLGA and chitosan encapsulated nanoparticles (NPs) have successfully been developed as new oral drug delivery systems with demonstrated high efficacy. This review aims to provide a comprehensive overview of the fabrication of PLGA and chitosan particulate systems using nano/microencapsulation methods, the current progress and the future outlooks of the nanoparticulate drug delivery systems. Especially, we focus on the formulations and nano/micro-encapsulation techniques using top-down techniques. It also addresses how the different phases including the organic and aqueous ones in the emulsion system interact with each other and subsequently influence the properties of the drug delivery system. Besides, surface modification strategies which can effectively engineer intrinsic physicochemical properties are summarised. Finally, future perspectives and potential directions of PLGA and chitosan nano/microencapsulated drug systems are outlined.

Recent advances in nanoneurology for drug delivery to the brain

The drug development for neurodegenerative disorders are the major challenge to the science in 21st century. Many FDA approved drugs currently available in the market have limitations in crossing the blood brain barrier (BBB) owing to its complicated vasculature posed by the presence of specialized cells. Nanotechnology is an emerging interdisciplinary area, which have many applications including drug delivery. Nanocarrier drug delivery involves targeting drugs enclosed in a particular polymer and/or amphiphilic lipids. Controlled release, nanoplatform availability for combinatorial therapy and tissue specific targeting by using advanced technologies such as molecular Trojan horse (MTH) technology are the promises of nanotechnology. Different problems are associated with drug delivery
across the BBB. Some are mostly related to the structure of brain microvasculature system while the others are related to the nanomaterial
structure. Different strategies, such as using polymeric/solid lipid nanoparticles and surface modification of nanomaterial with surfactants
like polysorbates have been conducted to solve these limitations. Also, nanodrug formulations with double coatings have been designed for oral delivery of drugs to overcome reticulo-endothelial system and to improve their BBB permeability. It seems that the best choice of strategy and material could be achieved with regard to the physical and chemical structure of the drugs. The present review discusses the potential applications of nanotechnology for drug delivery across the BBB.

Promises of nanotechnology for drug delivery to brain in neurodegenerative diseases

Brain is a delicate organ, isolated from general circulation and characterized by the presence of relatively impermeable endothelial cells with tight junctions, enzymatic activity and the presence of active efflux transporter mechanisms. These formidable obstacles often block drug delivery to the brain across the blood-brain barrier (BBB). Although several promising molecules have the potential in the in vitro settings but lack of in vivo response is probably because the molecule cannot reach the brain in a sufficient concentration. Drug delivery across the BBB is a major limitation in the treatment of central nervous system (CNS) disorders and CNS infections. This review deals with the role of nanobiotechnology in CNS drug delivery, in which three categories of carbon nanotubes, nanowires and nanoparticles (NPs) are explained. The small size of the NPs makes them an ideal choice to penetrate the BBB. Several mechanisms are involved in this process and various strategies are used. There are some concerns about the safety of NP entry in the brain that need to be resolved before human use. Although there is no approved nanotechnology-based CNS drug available the future for such neuro-nanobiotechnology based delivery system developments is promising.

Targeted multimodal liposomes for nano-delivery and imaging: an avenger for drug resistance and cancer.

Understanding the cellular target structure and thereby proposing the best delivery system to achieve sustained release of drugs has always been a significant area of focus in biomedical research for translational benefits. Specific targeting of the receptors expressed on the target cell represents an effective strategy for increasing the pharmacological efficacy of the administered drug. Liposomes offer enhanced conveyance as a potential carrier of biomacromolecules such as anti-cancer proteins, drugs and siRNA for targeting tumour cell death. Commonly used liposomal constructs for various therapies are Doxil, Myocet, DepoCyt and Abraxanes. However, recent strategy of using multifunctional liposomes for the sustained release of drugs with increased plasma residence time and monoclonal antibody-based targeting of tumours coupled with imaging modalities have attracted enormous scientific attention. The ability of liposomes coated with specific ligands such as Apo-E derived RGD R9 and Tat peptide, to reverse the conceptualisation of drug resistance and cross the blood brain barrier, provides promising future for their use as an efficient drug delivery system. By outlining the recent advancements and innovations in the established concept of liposomal drug delivery, this review will focus on the multifunctional liposomes as an emerging novel lipid based drug delivery system.

Multifunctional nanoparticle-EpCAM aptamer bioconjugates: a paradigm for targeted drug delivery and imaging in cancer therapy

The promising proposition of multifunctional nanoparticles for cancer diagnostics and therapeutics has inspired the development of theranostic approach for improved cancer therapy. Moreover, active targeting of drug carrier to specific target site is crucial for providing efficient delivery of therapeutics and imaging agents. In this regard, the present study investigates the theranostic capabilities of nutlin-3a loaded poly (lactide-co-glycolide) nanoparticles, functionalized with a targeting ligand (EpCAM aptamer) and an imaging agent (quantum dots) for cancer therapy and bioimaging. A wide spectrum of in vitro analysis (cellular uptake study, cytotoxicity assay, cell cycle and apoptosis analysis, apoptosis associated proteins study) revealed superior therapeutic potentiality of targeted drug loaded NPs over other formulations in EpCAM expressing cells. Moreover, our nanotheranostic system served as a superlative bio-imaging modality both in 2D monolayer culture and tumor spheroid model. Our result suggests that, these aptamer-guided multifunctional NPs may act as indispensable nanotheranostic approach toward cancer therapy.

An aptamer-mediated siRNA delivery system targeting breast tumourigenic cells

In this study, through developing a RNA interference based gene-knockdown system, the expression of Survivin - a critical gene involved in breast cancer initiation and relapse was silenced. This approach reversed chemo-resistance, transforming Doxorubicin - a classical chemotherapy drug to one able to act on drug-resistant breast cancer stem cells.